Infoblox Trinzic 1400 /TE-1410-NS1GRID-AC/ネットワーク ストア サービス アプライアンス、動作確認済み、初期化済み

  • 商品説明・詳細

  • 送料・お届け

商品情報

Infoblox Trinzic 1400 /TE-1410-NS1GRID-AC/ネットワーク サービス アプライアンス、動作確認済み、初期化済み
・本台・Western Digital WD2500BHTZ SATA 250GB * 1個
テストログは下記の内容をご確認ください。同商品が数台ありシリアルナンバーなどが異なることもありますのでご参考ください。-------------------------------------------------------------------------------------------------------
TAS Latency : 9 as:24/Trp:9/Trcd:9/Twr:10/Trfc:107/Twtr:5/Trrd:4/Trtp:5/Tfaw:2Memory Type : RDIMM(ECC mode)IPMI card is first powered.System waits for its initialization..............Initializing USB Controllers .. Done.8184MB OK [ 0.000000] Infoblox: Entering Kernel Start...[ 0.031014] Infoblox: Kernel is alive now.c:107/Twtr:5/Trrd:4/Trtp:5/Tfaw:2INIT: version 2Jun 24 01:12:39 /etc/rc.d/rc: executing /etc/rc.d/rcsysinit staJun 24 01:12:39 /etc/rc.d/rcsysinit: /etc/rc.d/rcsysinit: system initializingJun 24 01:12:39 /etc/rc.d/rcsysinit: mounting /procJun 24 01:12:39 /etc/rc.d/rcsysinit: mounting sysfs on /sys...Jun 24 01:12:39 /etc/rc.d/rcsysinit: enabling swapJun 24 01:12:40 /etc/rc.d/rcsysinit: checking root file system...Jun 24 01:12:40 /etc/rc.d/rcsysinit: root file system okJun 24 01:12:40 /etc/rc.d/rcsysinit: mounting /dev tmpfsI KVM)Jun 24 01:12:40 /etc/rc.d/rcsysinit: making device filesJun 24 01:12:47 /etc/rc.d/rcsysinit: mounting root ReadonlyJun 24 01:12:47 /etc/rc.d/rcsysinit: mounting tmpfs file systemJun 24 01:12:47 /etc/rc.d/rcsysinit: mounting /run file systemJun 24 01:12:47 /etc/rc.d/rcsysinit: Start checking /config>>> fsck -y -v /dev/sda5 (config):okJun 24 01:12:47 /etc/rc.d/rcsysinit: Done checking /configJun 24 01:12:47 /etc/rc.d/rcsysinit: New Hard Disk Drive is detected!***Do you want to reinitialize this disk? (y or n):
[2019/06/24 01:14:29 UTC] reinitialize disk /dev/sdb block size 512[2019/06/24 01:14:30 UTC] Repartitioning disk (/dev/sdb) using template /etc/t plates/part.storage.500[2019/06/24 01:15:53 UTC] creating filesystems...100%[2019/06/24 01:15:54 UTC] Starting data store reset:[2019/06/24 01:15:55 UTC] Mounting data store on /dev/sdb2[2019/06/24 01:15:56 UTC] Restoring default data store(attempt 1)[2019/06/24 01:16:08 UTC] Restoring recovery data from /config/node_recovery[2019/06/24 01:16:09 UTC] Restoring recovery data done[2019/06/24 01:16:10 UTC] Setting factory defaults[2019/06/24 01:16:26 UTC] Data store reset complete[2019/06/24 01:16:29 UTC] Remounting root as ro
Jun 23 21:16:30 /etc/rc.d/rcsysinit: Start checking /reporting>>> fsck -y -v /dev/sdb3 (reporting):okJun 23 21:16:30 /etc/rc.d/rcsysinit: Done checking /reportingJun 23 21:16:30 /etc/rc.d/rcsysinit: mounting all filesystemsJun 23 21:16:30 /etc/rc.d/rcsysinit: Error code: 32 from mounting /storageJun 23 21:16:30 /etc/rc.d/rcsysinit: mounting devpts file systemJun 23 21:16:31 /etc/rc.d/rcsysinit: loading kdump kernelJun 23 21:16:31 /etc/rc.d/rcsysinit: setting hostname to "infoblox.localdomainJun 23 21:16:31 /etc/rc.d/rcsysinit: starting syslog-ngJun 23 21:16:33 /etc/rc.d/rcsysinit: starting acpidINIT: Entering runlevel: 3rcsysiJun 23 21:16:33 /etc/rc.d/rc: executing /etc/rc.d/rc3 startJun 23 21:16:33 /etc/rc.d/rc3: start normal operationJun 23 21:16:33 /etc/rc.d/rc3: setting system umaskJun 23 21:16:33 /etc/rc.d/rc3: starting productStarting ptop
Hit "Esc" and "Enter" now for Emergency prompt, or wait 10 seconds before cont uing to boot.


INIT: no more processes left in this runlevel
[2019/06/24 01:17:57.213] Infoblox system initializing...[2019/06/24 01:17:59.507] LAN port IPv4 192.168.1.2, netmask 255.255.255.0, ga way 192.168.1.1
[2019/06/24 01:18:03.514] Starting services...login: adminpassword:

Infoblox NIOS Release 7.3.11-348103 (64bit) Copyright (c) 1999-2015 Infoblox Inc. All Rights Reserved.
type "help" for more information

Infoblox >Infoblox > show versionVersion : 7.3.11-348103SN : 1401201310100476Hotfix : N/AInfoblox > show tech-supportCurrent date and time: Mon Jun 24 01:18:30 UTC 2019 Up time : 4 minVersion : 7.3.11-348103Hardware ID : 1401201310100476
License Type : GridExpiration Date : PermanentLicense String : GAAAAL2jVobbcu/Zuq0yTkJJJwNEJN62kusWHQ==
License Type : DNSExpiration Date : PermanentLicense String : EQAAALyjUZ+EM+Gd+LRjUg8FMlMM
License Type : DHCPExpiration Date : PermanentLicense String : EgAAALylQZPVL6zM5PkyTkJJawBZbw==
Version : 7.3.11-348103SN : 1401201310100476Hotfix : N/AREVERT version is: 6.12.9-290314No upgrade history found for this appliance.
Enter for next page or q to cancel the command.
LCD status:LCD input buttons are operational...LCD display is enabledLCD settings:LCD Settings:lcd_version:52autodim:30brightness:7hwident:off
Current GUI/CLI timeout is 600 seconds (00:10:00)Current remote console access settings: disabled remote console access (grid-level): disabledCurrent support access status: off support access (grid-level): disabled Watchdog enabled : truecurrent dhcp expert mode settings: DHCP Expert Mode enabled (grid-level): falseDebug logging status : disabledCurrent delete tasks interval is 14 days DHCP lease expiration rate limit: on DHCP startup lease expiration time limit: 5 seconds
Enter for next page or q to cancel the command.
DHCP failover association lease release delay time: no delay Grid: off, Member: off (grid override: off), Effective: off DNS "named" worker threads: Default (selected at run-time) DNS "named" gsstsig_key_expiration_time: 3600current security settings: Access restricted: falseGrid Status: ID Grid MasterHA Status: Not ConfiguredHostname: infoblox.localdomain
DNS configurationThe configuration file does not exist
DHCP configurationDHCP service is not enabled
DHCPv6 configurationDHCPv6 service is not enabled
ARP information
bloxTools status
Enter for next page or q to cancel the command.
bloxTools status: unconfigured
Route informationFrom LAN1: IPv4 route table:192.168.1.0/24 dev eth1 scope linkdefault via 192.168.1.1 dev eth1
IPv6 route table:
From anycast route table:
From IPv4 main route table:default via 192.168.1.1 dev eth1 proto static192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.2From IPv6 main route table:
Enter for next page or q to cancel the command.
fe80::/64 dev eth1 proto kernel metric 256
Network interfaceLAN1: IP Address: 192.168.1.2 MAC Address: 00:25:90:E0:53:62 Mask: 255.255.255.0 Broadcast: 192.168.1.255 MTU: 1500 Metric: 1 IPv6 Link: fe80::225:90ff:fee0:5362/64 IPv6 Status: Enabled Negotiation: Enabled Speed: 1000M Duplex: Full DSCP Value: 0 Status: UP BROADCAST RUNNING MULTICAST
Statistics Information Received packets: 32 bytes: 3154 (3.0 KiB) errors: 0 dropped: 0 overruns: 0 frame: 0 Transmitted packets: 2 bytes: 128 (128.0 b) errors: 0 dropped: 0
Enter for next page or q to cancel the command.
overruns: 0 carrier: 0 Collisions: 0 Txqueuelen: 1000LAN2: IP Address: MAC Address: 00:25:90:E0:53:60 Mask: Broadcast: MTU: 1500 Metric: 1 IPv6 Link: IPv6 Status: Enabled Negotiation: Enabled Speed: unknown Duplex: unknown Status: BROADCAST MULTICAST
Statistics Information Received packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 frame: 0 Transmitted packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 carrier: 0 Collisions: 0 Txqueuelen: 1000
Enter for next page or q to cancel the command.
HA: IP Address: MAC Address: 00:25:90:E0:53:61 Mask: Broadcast: MTU: 1500 Metric: 1 IPv6 Link: IPv6 Status: Enabled Negotiation: Enabled Speed: unknown Duplex: unknown Status: BROADCAST NOARP MULTICAST
Statistics Information Received packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 frame: 0 Transmitted packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 carrier: 0 Collisions: 0 Txqueuelen: 1000MGMT:
Enter for next page or q to cancel the command.
IP Address: MAC Address: 00:25:90:E0:53:63 Mask: Broadcast: MTU: 1500 Metric: 1 IPv6 Link: IPv6 Status: Enabled Negotiation: Enabled Speed: unknown Duplex: unknown Status: BROADCAST MULTICAST
Statistics Information Received packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 frame: 0 Transmitted packets: 0 bytes: 0 (0.0 b) errors: 0 dropped: 0 overruns: 0 carrier: 0 Collisions: 0 Txqueuelen: 1000
Processor and memory statistics--------------------memory------------------ ---swap-- -----io---- --system-- --cpu---- swpd free idle buff cache si so bi bo in cs sy id wa st 0 7594140 2598084 41316 4954740 0 0 620 8010 103 280 2 74 17 0 Capacity Available Use%Disk space for data: 231G 215G 3%

Enter for next page or q to cancel the command.
Memory usage total used free buffers cachedMem: 8091764 5498344 2593420 41320 4833492Swap: 1048572 0 1048572Total: 9140336 5498344 3641992
Logfiles present on the system--------------------------------audit.log 0 kinfoblox.log 52 kmessages 131 k

remote refid st t when poll reach delay offset jitter============================================================================== 127.127.1.1 .LOCL. 12 l 6 64 1 0.000 0.000 0.000
No rate limits present.
Start Date=Jan 1 00:00:00 2004 GMTEnd Date=Dec 31 23:59:59 2037 GMTCurrent internal apache http port: 9000Current internal TAXII server port: 9183Current internal jetty http port: 8080
SafeNet Support InfoNo HSM group configured

Enter for next page or q to cancel the command.

OCSP authentication service is not configured
IPv6 Neighbor EntriesLAN1:MGMT:LAN2:
Static routes
IPv4 static routes
No IPv4 static routes defined
IPv6 static routes
No IPv6 static routes defined
DSCP Grid Level: 0 (Ox0) Member Level: Use grid setting

Enter for next page or q to cancel the command.
Mircosoft Sticky IPms_sticky_ip is off
CPU and input/output statistics for devices and partitionsLinux 3.14.25 (infoblox.localdomain) 06/24/19 _x86_64_ (4 CPU
06/24/19 01:18:31avg-cpu: %user %nice %system %iowait %steal %idle 1.87 4.79 2.39 17.20 0.00 73.75
Recursion depth limit.Recursion depth limit: 7
Recursion queries limit.Recursion queries limit: 150Infoblox >shutdown SHUTDOWN THE SYSTEM? (y or n): y
SYSTEM SHUTTING DOWN!

The IMC is operating with DDR3 1333MHzDRAM Timings: TDIMM(ECC mode)
System waits for its initialization...............Initializing USB Controllers .. Done.8184MB OK
Infoblox > unknown command ""type "help" for more informationInfoblox > show versionVersion : 7.3.16-357817SN : 1401201310100330Hotfix : N/AInfoblox > show tech-supportCurrent date and time: Mon Jun 24 01:58:56 UTC 2019 Up time : 4 minVersion : 7.3.16-357817Hardware ID : 1401201310100330
License Type : DHCPExpiration Date : PermanentLicense String : EgAAAGz8DzydspyhhruZdzswmC/6Kg==
License Type : DNSExpiration Date : PermanentLicense String : EQAAAGz6HzDMrtHwmvbIa3Z8wXyv
License Type : GridExpiration Date : PermanentLicense String : GAAAAG36GCmT79+02O+Zdzsw1CznYRpakupYIQ==
Version : 7.3.16-357817SN : 1401201310100330Hotfix : N/AREVERT version is: 7.3.11-348103No upgrade history found for this appliance.
Enter for next page or q to cancel the command.
LCD status:LCD input buttons are operational...LCD display is enabledLCD settings:LCD Settings:lcd_version:52autodim:30brightness:7hwident:off
Current GUI/CLI timeout is 600 seconds (00:10:00)Current remote console access settings: disabled remote console access (grid-level): disabledCurrent support access status: off support access (grid-level): disabled Watchdog enabled : truecurrent dhcp expert mode settings: DHCP Expert Mode enabled (grid-level): falseDebug logging status : disabledCurrent delete tasks interval is 14 days DHCP lease expiration rate limit: on DHCP startup lease expiration time limit: 5 seconds
Enter for next page or q to cancel the command.
DHCP failover association lease release delay time: no delay Grid: off, Member: off (grid override: off), Effective: off DNS "named" worker threads: Default (selected at run-time) DNS "named" gsstsig_key_expiration_time: 3600current security settings: Access restricted: falseGrid Status: ID Grid MasterHA Status: Not ConfiguredHostname: infoblox.localdomain
DNS configurationThe configuration file does not exist
DHCP configurationDHCP service is not enabled
DHCPv6 configurationDHCPv6 service is not enabled
ARP information
bloxTools status
Enter for next page or q to cancel the command.
bloxTools status: unconfigured
Route informationFrom LAN1: IPv4 route table:192.168.1.0/24 dev eth1 scope linkdefault via 192.168.1.1 dev eth1
IPv6 route table:
From anycast route table:192.168.1.0/24 dev eth1 scope link
From IPv4 main route table:default via 192.168.1.1 dev eth1 proto static192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.2
SafeNet Support InfoNo HSM group configured
Enter for next page or q to cancel the command.


OCSP authentication service is not configured
IPv6 Neighbor EntriesLAN1:MGMT:LAN2:
Static routes
IPv4 static routes
No IPv4 static routes defined
IPv6 static routes
No IPv6 static routes defined
DSCP Grid Level: 0 (Ox0) Member Level: Use grid setting
Enter for next page or q to cancel the command.

Mircosoft Sticky IPms_sticky_ip is off
CPU and input/output statistics for devices and partitionsLinux 3.14.25 (infoblox.localdomain) 06/24/19 _x86_64_ (4 CPU)
06/24/19 01:58:57avg-cpu: %user %nice %system %iowait %steal %idle 1.98 4.83 2.43 17.29 0.00 73.47
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtnsda 41.85 1146.03 13.09 296903 3392sda1 1.72 8.53 0.20 2209 52sda2 36.20 1122.34 8.28 290765 2144sda3 1.27 5.06 0.00 1312 0sda4 0.02 0.03 0.00 7 0sda5 2.27 8.62 4.62 2234 1196sdb 100.13 27.73 31771.94 7183 8231156sdb1 24.55 7.28 7923.45 1885 2052728sdb2 69.23 5.39 23687.30 1397 6136668sdb3 1.50 4.44 161.18 1149 41756
Enter for next page or q to cancel the command.



MAC Address Spoofing MAC address spoofing is disabled on LAN1. MAC address spoofing is disabled on LAN2.
Recursion depth limit.Recursion depth limit: 7
Recursion queries limit.Recursion queries limit: 150
■ 保証期間: ノークレームノーリターンでお願いします。■

残り 4 8,000円

(441 ポイント還元!)

翌日お届け可(営業日のみ) ※一部地域を除く

お届け日: 12月09日〜指定可 (明日9:00のご注文まで)

  • ラッピング
    ラッピング
希望しない
希望する ( +600円 )
希望しない
数量
同時に5点までのご購入が可能です。
お気に入りに保存

対応決済方法

クレジットカード
クレジットカード決済
コンビニ前払い決済
コンビニ決済
代金引換
商品到着と引き換えにお支払いいただけます。 (送料を含む合計金額が¥287,626 まで対応可能)
ペイジー前払い決済(ATM/ネットバンキング)
以下の金融機関のATM/ネットバンクからお支払い頂けます
みずほ銀行 、 三菱UFJ銀行 、 三井住友銀行
りそな銀行 、ゆうちょ銀行、各地方銀行
Amazon Pay(Amazonアカウントでお支払い)

大量注文に関して

30個以上かつ10万円以上のご購入はこちらからお問い合わせください

お問い合わせはこちらから